Climadiff AIRPUR20 Notice D'utilisation page 20

6. USER MANUAL
1. Connect the appliance.
CAUTION: never handle the plug with wet or damp hands, which could cause electric shock.
Always disconnect the device before moving it.
1. On / Off
After pressing the On / Off button, the unit switches on. Press On / Off again to turn it off.
2. TIMER
Press the "TIMER" button once the number "1" will be displayed for 1 hour, and will increase by 1 for each
press of the button. The maximum setting time is 8 hours.
3. Ion
Press the "ion" button, the anion generator will turn on and the indicator light will come on. Press again to
turn off the function and the light.
4. SPEED
The default speed after start-up is "low". The speed can be changed depending on the number of times you
press the "SPEED" button.
Tip: low and moderate speeds are suitable for common situations, but if the unit has just started or if the air
quality is very poor, use high speed.
5. SLEEP mode
Press the « SLEEP » button to start night mode: slow and silent speed.
6. AUTO
Press the AUTO button to adjust the fan speed according to the air quality
7. Filter cleaning
When filter cleaning mode is on, the filter must be cleaned or replaced. After that, simultaneously press
"SPEED" and "ION" for 3 seconds, then the filter wear count will be reset and the indicator will go out.
20