Product Assembly - Climadiff AIRPUR20 Notice D'utilisation

5. PRODUCT ASSEMBLY

Filters installation
Note:
Always disconnect the appliance before installing the filters.
Check the front and back of the filters to install them correctly.
1. Remove the front plate. Hold the unit straight, hold the concave
positions of the plate with your hands, then gently pull the top of the
plate toward your direction. Finally, pull on the bottom of the plate to
detach it.
2. Remove the filters.
3. For the first use of the filters, open the plastic packaging, take out the
filters and install them in the appliance in this order:
4. Replace the plate by reversing the removal steps: start at the bottom.
1.
19