Installation - oventrop Regudis W-HTE Mode D'emploi

Regubox
4.

Installation

Abb. 2: Installation of the thermal insulation
cover
(1) Exclusive surface-mounted cabinet
"Regubox"
(2) Dwelling station "Regudis W-HTE" in
lower shell
1. Undo the screws (WAF 10).
2. Install the angle brackets in the specified
positions.
Abb. 3: Angle bracket position
134459580-V01.02.2019
2
1
1
(1)
Angle bracket
3. Tighten the screws.
4. Mount the exclusive surface-mounted cab-
inet "Regubox" on the "Regudis W-HTE"
dwelling station. The dwelling station will
then be located within a heat-insulated
lower shell.
The power supply cable can either
be routed along the lower shell on
the left or right.
Abb. 4: Cable routing
Installation
19