Gaggia Milano GRAN GAGGIA STYLE Mode D'emploi page 24

• (Fig.16) - Turn the filter holder from left to right until
it locks into place. Release the grip from the pressurized
filter holder. The handle is automatically slightly turned
leftwards.
This movement guarantees proper pressurized filter holder
performance.
• (Fig.18) - Preheat the pressurized filter holder by pressing
the brew button (18); some water will flow out of the pres-
surized filter holder (this operation is only necessary
for the first coffee).
• After 150 cc of water has flowed out, press the brew button
(18) again to stop hot water dispensing.
• (Fig.16) - Remove the filter holder from the machine by
turning it from right to left and pour out any water left.
• (Fig.35) - Remove the measuring scoop from the ma-
chine.
• (Fig.10) - Add 1-1.5 measuring scoop(s) for single coffee
and 2 measuring scoops for double coffee. Remove any
coffee residues from the rim of the filter holder.
• (Fig.15) - Insert the filter holder (11) into the brew unit
(8) from the bottom.
• (Fig.16) - Turn the filter holder from left to right until it
locks into place.
• (Fig.17) - Take 1 or 2 preheated cups and place them
under the filter holder. Make sure that they are correctly
placed under the coffee brewing nozzles.
• (Fig.18) - Press the brew button (18).
• When the desired quantity of coffee has been obtained,
press the brew button (18) again to stop brewing and re-
move the cups of coffee (Fig.19).
• (Fig.20) - Wait a few seconds after completing the brew-
ing. Then remove the filter holder and empty the remain-
ing coffee grounds out.
Note: if a small quantity of water remains in
the filter holder, this has to be considered as
absolutely normal and is due to the filter holder fea-
tures.
Important Note: the filter (13) should be kept
clean to guarantee perfect results. Clean daily
after use (Fig.21).
• 24 •
4219-450-03731 MANUAL GRAN. GAG. IT-EN-DE-FR-ES-PT-NL-SV-NO-FI-DA-GR.indd 24
5.2 Using Coffee Pods
Important note: This function is only available
in the Style, Deluxe and Prestige models.
• (Fig.11) - Use a coffee spoon to remove the filter for
ground coffee (13) from the pressurized filter holder (11).
• (Fig.12) - Insert the pod adapter (14) - with the convex
part facing down - into the pressurized filter holder (11).
• (Fig.13) - Then, insert the pod filter (15) into the pressur-
ized filter holder (11).
• (Fig.15) - Insert the pressurized filter holder into the brew
unit (8) from the bottom.
• (Fig.16) - Turn the filter holder from left to right until
it locks into place. Release the grip from the pressurized
filter holder. The handle is automatically slightly turned
leftwards.
This movement guarantees proper pressurized filter holder
performance.
• (Fig.18) - Preheat the pressurized filter holder by pressing
the brew button (18); some water will flow out of the pres-
surized filter holder (this operation is only necessary
for the first coffee).
• After 150 cc of water has flowed out, press the brew button
(18) again to stop hot water dispensing.
• (Fig.20) - Remove the pressurized filter holder from the
machine by turning it from right to left and pour out any
water left.
• (Fig.14) - Insert the pod into the filter holder and make
sure that the paper of the pod does not overhang the filter
holder.
• (Fig.15) - Insert the pressurized filter holder into the brew
unit (8) from the bottom.
• (Fig.16) - Turn the filter holder from left to right until it
locks into place.
• Take 1 preheated cup and place it under the filter holder.
Check that it is correctly placed under the coffee brewing
nozzles.
• (Fig.18) - Press the brew button (18).
• When the desired quantity of coffee has been obtained,
press the brew button (18) again to stop brewing and re-
move the cup of coffee.
• (Fig.20) - Wait a few seconds after brewing, then remove
the filter holder and dispose of the used pod.
Important Note: the filter (15) and the adapter
(14) should be kept clean to guarantee perfect
results. Clean daily after use (Fig.21).
03/12/2018 12:19:23