Bosch Drive Unit Mode D'emploi page 35

Masquer les pouces Voir aussi pour Drive Unit:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 48
During the navigation, the guidance (e.g. turn left in 50 meters)
will also be displayed via a cross fade in other operating modes.
If you interrupt a journey for which you are using navigation
and then call up "Map & Navigation", you will be asked
whether or not you wish to continue navigation. If you contin-
ue navigation, the navigation system will guide you to your last
destination.
If you have imported GPX routes via the online portal, these
will be transferred to your Nyon via Bluetooth® or via a wi-fi
connection. You can start these routes when you wish. If you
are near a route, you can have the navigation system guide
you to the starting point or to an intermediate destination.
If you are using intermediate destinations, a message will in-
form you when you have reached an intermediate destination.
Nylon is not suitable for a navigation without a bicycle (for hik-
ers or motorists).
At temperatures below 0 °C, the altitude measurement is like-
ly to deviate significantly.
Operating mode "Fitness"
Via this mode you can view various fitness-related information.
Based on the activity levels provided in your registration, the
effect of your previous activities will be displayed on your
stamina level (training effect).
To check your heart rate, you can use a chest strap, which you
can connect to Nyon via Bluetooth®.
Compatible models can be found in the online manual under
"www.Bosch-eBike.com/nyon-manual".
A chest strap is not included in the delivery.
f1
f2
f3
f4
f1 Clock
f2 Current performance/heart rate*
f3 Display of the current training effect
f4 Training effect
f5 Kilocalories burned
f6 Current cadence
f7 Average speed
f8 Duration
* When using a chest strap to measure the heart rate (not included
in the delivery), your current heart rate will be displayed instead of
the performance.
Via the sub menus, you can reset the average values or switch
to individualised displays. Detailed instructions can be found
in the online manual under
"www.Bosch-eBike.com/nyon-manual".
Bosch eBike Systems
Operating mode "Settings"
This operating mode allows you to set the basic configura-
tions of your on-board computer.
Note: Some basic configurations can only be changed when
Nyon is inserted into the holder 4.
To reach the "Settings" menu, press the joystick 1 down in
the main menu until "Settings" is displayed.
Tip: If you press the joystick down long enough, you will also
reach the "Settings" menu.
The following configurations can be made:
– "Connections": You can configure the Bluetooth® config-
urations, a new smartphone connection, a WiFi connection
or a heart rate monitor.
When you enable WiFi, Nyon searches for available net-
works. Found networks will be displayed. Use the joystick
1 to select the desired network and enter the password.
– "Set Altitude": You can adjust the value displayed to the
actual altitude to compensate for weather-related
changes.
– "Map&Navigation": Here you can configure the map
display and turn on automatic adaptation of the display,
dependant on the ambient brightness.
– "My Profile": Here you can also choose to display the
active user.
– "My eBike": When Nyon is plugged in, you can change the
pre-set value given by the manufacturer of the wheel cir-
cumference by ±5 %.
The bicycle manufacturer may base the service date on the
distance travelled and/or on a period of time. The due date
for the service is displayed under "Service".
f5
– "My Nyon": Here you can search for updates, configure
the Home button, automatically set the counters such as
trip meter, calories burned and average values to "0" every
f6
night, or reset Nyon to the factory settings.
f7
– "Brightness": You can adjust the brightness of the display
here.
f8
– "International": You can set speed and distance in kilo-
metres or miles, display clock in 12 or 24 hour format, se-
lect the time zone and set your preferred language. The
current time is automatically taken from the GPS signal.
– In the "Help" menu item, you will find a selection of FAQs
(frequently asked questions), contact details and informa-
tion about systems and licences.
English–7
0 276 001 SAN | (13.7.15)

Publicité

Table des Matières
loading

Table des Matières