3M PELTOR SportTac MT16H210F Mode D'emploi page 9

GB
6:3 Explanation of the table electrical audio input level (Table E)
1. Model designation
2. Input signal level U (mV, RMS)
3. Mean Sound Pressure Level (dB(A))
4. Sound pressure Standard Deviation, (dB)
5. Input signal level for which the mean plus one standard deviation equals 82 (dB(A))
6:4 Explanation of the criterion level (Table I)
Criterion level is the sound pressure level in dB(A) of the noise environment resulting in
85 dB(A) effective to the ear while wearing the hearing protectors. Three different criterion
levels are defined related to the frequency content of the noise.
H = criterion level for high- frequency noise
M = criterion level for medium-frequency noise
L = criterion level for low-frequency noise
7. SPARE PARTS/ACCESSORIES
3M™ PELTOR™ HY21
Replaceable hygiene kit. Replace at least twice a year to ensure constant attenuation,
hygiene and comfort.
3M™ PELTOR™ HY100A
Clean single-use protectors
3M™ PELTOR™ TAMT06V
Cable with PTT button and microphone, J22 connector
3M™ PELTOR™ HY450/1
Head Pad. To be used for small size range fitting
3M™ PELTOR™ FL6H
3.5-mm mono plug
3M™ PELTOR™ FL6M
2.5-mm mono plug
3M™ PELTOR™ FL6N
3.5-mm stereo plug for Micman com radio
Important Notice
3M does not accept liability of any kind, be it direct or consequential (including, but not limited
to, loss of profits, business and/or goodwill) arising from reliance upon any information herein
provided by 3M. The user is responsible for determining the suitability of the products for their
intended use. Nothing in this statement will be deemed to exclude or restrict 3M's liability for
death or personal injury arising from its negligence.
3
FP3584_reve_.indd 3 2017-04-04 09:38:01