Publicité
Les langues disponibles
Les langues disponibles
CAUTION : Before using this phone, and, in order to prevent
from potential acoustic shocks all users who are not hearing
impaired, make sure that the "Amplify switch" located under the
phone is on the "MANUAL" position.
See "Amplify switch" section for more details.
Connecting and installing
Plug one end of the twisted cord into the socket provided on the end of the
handset, and the other end to the socket on the left side of the phone.
Connect the straight telephone line cord to the socket at the rear of the
phone and the other end to the telephone outlet.
Wall mounting
The HD Max can be wall mounted by following the procedure below:
a) Slide out the clip located
next to the hook switch and
turn it upside down before
sliding it back into place. Note
– the clip will locate into a
recess in the handset, which
will hold the handset when wall mounted.
b) Fit the wall bracket (supplied with the phone)
under the base of the phone, locating the tabs on
the bracket into the slots in the phone.
c) Select an area of the wall where you would like to hang your
phone and check that there are no pipes or electrical wires buried in
the wall in this area.
9
Publicité
