Safety Instructions Relating Specifically To The Equipment - Meister MDS260-1 Traduction Du Manuel D'utilisation Original

5456610-Dreiecksch_man 27.04.18 09:12 Seite 38
• Use the additional handle supplied
with the unit. Loss of control of the
unit may lead to injuries
• Hold the tool by the insulated handle
surfaces when carrying out tasks
during which it is possible that the
tools will come across hidden power
cables or its own cable. Contact with
a power-carrying cable can also put
metal parts of the unit under power
and cause an electric shock.
6 – Safety instructions
relating specifically to
the equipment
• Always switch on the device before
introducing it to the workpiece.
• Materials containing asbestos may
not be processed. When working with
any other materials containing fibres,
use dust protection masks and
extraction systems.
• If you wish to use the device
outdoors, ensure it is connected via a
residual current circuit breaker.
Extension cable and plug must be
designated for use outdoors.
• Only use for dry sanding work.
• Breathing in dust from sanding is a
health risk, therefore always work
with the dust extraction function
activated. If necessary, use a mask.
• Only attach accessories with hook and
eye coatings to the sanding plate.
• The dust extraction openings of the
sand paper and the sanding plate
must match, as far as possible.
38
• When sanding, do not put excessive
pressure on the machine in order to
prevent the machine from coming to a
standstill.
• Secure the work piece to prevent it
from slipping by using tensioning
mechanisms.
• Make sure that cables always lead
away from the work place.
• During operation, always guide the
device with both hands and ensure
that you are standing firmly.
• The device should never be allowed
to get wet and should not be
operated in a damp environment.
• Prior to each use, check the device,
the cable and the plug. Any damages
should only be repaired by a specialist.
Only plug the device into the socket
when the machine is switched off.
• When carrying out work in which dust
is generated, wear a face mask and
safety goggles - do not smoke and
avoid naked flames.
• Wear ear-protectors.
• Wear safety goggles.
• Before carrying out any work on the
machine, pull the plug out of the socket.