WARNING! RISK TO LIFE FROM ELECTRIC SHOCK.
Before cleaning the warming jacket, always pull the mains plug out
of the mains socket and separate the plug-in connector 2 from the
plug for the control unit 3 (see Fig. B).
DANGER OF ELECTRIC SHOCK!
Do not reconnect the control 1 to the warming jacket until the plug-
in connector 2 and the warming jacket are completely dry.
Otherwise, there is risk of electric shock.
DANGER OF ELECTRIC SHOCK! DANGER OF MATERIAL DAMAGE!
Do not, under any circumstances, switch on the warming jacket to
dry it.
• Do not use chemical cleaners or scouring agents to clean the
warming jacket or the control unit 1. Otherwise the product
could be damaged.
• Never immerse the control unit 1 in water or other liquids.
Otherwise you might damage it.
• Do not hang the warming jacket up to dry with pegs or similar.
The warming jacket may otherwise be damaged. Use a dry, a
fluff-free cloth to clean and care for the warming jacket and the
control unit 1 .
• To remove stubborn dirt from the warming jacket, you can
dampen the cloth or moisten it with a little mild liquid detergent.
• First open the Velcro on the textile cover and take out the
warming jacket.
• Clean the textile cover in accordance with the cleaning symbols
on the label.
• The heating pad can be cleaned in a handwash and the
removable cover is machine washable. Set the washing
machine on a gentle 30 °C washing program.
Do not bleach. Do not use detergents containing bleach (such
as full temperature range washing powders or liquids).
• Do not dry the warming jacket or the removable cover in the
tumble dryer.
• Do not iron the warming jacket or the removable cover.
• Do not clean with chemicals / dry clean.
• Be careful when replacing the warming jacket in the textile
cover that the cables exit at the end of the zip. Otherwise, it will
not be possible to close the zip.