Automatic Switch-Off; Cleaning And Care - Cresta KTS 215 Mode D'emploi

SWITCHING ON / OFF / SELECTING THE TEMPERATURE
To use the device, first connect the control unit 1 to the warming
jacket by plugging the plug-in connector 2 and the plug for the
control unit, 3 together (see Fig. B).
• SWITCHING ON:
Set the control unit 1 to to a temperature from 1 - 6 to switch on
the Warming jacket.
• SWITCHING OFF:
Set Level 0 on the control 1 to switch the warming jacket off.
If you are going to use the device for a number of hours, set it to
the middle temperature (setting 3).
• SELECTING THE TEMPERATURE:
Set the highest temperature level (Level 6) shortly before use. This
heats the jacket faster.
TEMPERATURE LEVELS
Set the required temperature level on the control 1 (see Fig. A).
Setting 0: off
Settings 1+2: minimum heat
Settings 3+4: medium heat
Settings 5+6: maximum heat

AUTOMATIC SWITCH-OFF

NOTE: The warming jacket switches off automatically after about
90 minutes. The LED indicator on the control unit 1 shows "A". First
select position "0" and after approx. 5 seconds select the required
temperature level to switch the warming jacket back on.
• Switch the warming jacket off (Level "0") or take the mains plug
out of the socket if you do not wish to use the warming jacket after
automatic switch-off.
To use the device, first connect the control unit 1 to the warming
jacket by plugging the plug-in connector 2 and the plug for the
control unit 3 together (see Fig. B).

CLEANING AND CARE

Use the warming jacket with the textile cover to prevent soiling or
damage to the device, particularly if using essential oils and
creams.