Probe - GE PT920 Mode D'emploi

P
ROBE
U
L
PPER
OWER
OR
O O
VEN VEN
On double oven models only.
1 2 3 4 5
6 7 8 9 0
E
NTER
B
AKE
1 2 3 4 5
6 7 8 9 0
E
NTER
S
TART
How to Set the Oven For Roasting When Using the Probe
Insert the probe into the food. See
the Using the probe section.
Plug the probe into the outlet in the
oven. Make sure it's pushed all the
way in. Close the oven door.
Touch PROBE.
For double oven models only,
touch UPPER OVEN or LOWER OVEN
to select the desired oven.
Touch the numbers to set the
desired internal food or meat
temperature. (The maximum
internal temperature for the
food that you can set is 200°F.)
Touch ENTER.
Touch BAKE.
Touch the numbers to set the
desired oven temperature.
Touch ENTER.
The screen will prompt if the probe is
inserted into the outlet and you have not
set a probe temperature and touched
ENTER.
Touch START.
The oven will turn on immediately and
stay on until the oven is turned off.
The convection fan will turn on (after
a short delay) and 100°F will appear in
the screen. (The temperature display
will start to change once the internal
temperature of the meat reaches 100°F.)
After the internal temperature of the
meat reaches 100°F, the changing
internal temperature will be shown in
the display.
When the internal temperature of
the meat reaches the number you
have set, the probe and the oven
turn off and the oven control
signals. To stop the signal, touch
the CLEAR/OFF pad. Use hot pads to
remove the probe from the food.
Do not use tongs to pull on it—
they might damage it.
GEAppliances.com
For double oven models only, to set the
second oven, select PRESS TO MAKE
LOWER OVEN SELECTIONS or PRESS TO
MAKE UPPER OVEN SELECTIONS as
needed and follow the above steps.
The set temperature may be changed
by touching CHANGE TIME-TEMP for the
appropriate oven.
The settings may be cancelled by
touching CANCEL for the appropriate
oven.
The timer can be set by touching SET
KITCHEN TIMER. See the Kitchen timer
section.
CAUTION:
To prevent possible
burns, do not unplug the probe from the oven
outlet until the oven has cooled. Do not store the
probe in the oven.
■
If the probe is removed from the food before
the final temperature is reached, a tone will
sound and the screen will prompt until the
probe is removed from the oven.
■
You can use the timer even though you cannot
use timed oven operations.
13