Cleaning; Storage; Disposal; Spare Parts - Garant 363000 Manuel D'utilisation

9. Cleaning

NOTICE
Cleaning with compressed air
If compressed air is used for cleaning there is a risk that metal chips may be blown into the thread
and slots.
» Do not use compressed air to clean clamping devices.
Do not use chemical, alcoholic, abrasive or solvent-based cleaning agents. Use a cleaning cloth to
clean the centring vice.

10. Storage

When putting away the centring vice, take care not to damage the base body or projecting com-
ponents. Place the centring vice on an underlay of wood, rubber or plastic. Before prolonged stor-
age, thoroughly clean the centring vice and apply preservative to it (see Grease the spindle [} 26]
and Grease the guides [} 26]) and protect it with a cover against dust and coarse dirt.

11. Disposal

Comply with the national and regional environmental protection and disposal regulations for cor-
rect disposal or recycling. Segregate items into metals, non-metals, composite materials and con-
sumables and dispose of them responsibly.

12. Spare parts

Use only original spare parts and wearing parts.

13. Technical data

13.1. CENTRING VICE

Size
Width in mm
Length in mm
Height in mm
Pivot angle in °
Weight in kg
Clamping force max. in kN
Torque max. in Nm
80S 80SP
80 80
170 170
40 40
- ± 2
3.240 3.228
25 25
85 85
www.hoffmann-group.com
80M 80MP
80 80
220 220
40 40
- ± 2
3.942 3.930
25 25
85 85
en
27