Device Overview; Safety; Grouped Safety Messages; Intended Use - Garant 363000 Manuel D'utilisation

GARANT XTRIC centring vice

3. Device overview

1
en
Fig. 1: Fig. Device overview
1 Base body
2 Spindle
3 Spindle nut, left-hand thread (fixed)
4 Spindle bearing with centring adjust-
ment
 Two moveable spindle nuts moved in opposite directions by the spindle.
 Centring adjustment allows the centre point of the workpiece to be corrected ±0.5 mm.

4. Safety

4.1. GROUPED SAFETY MESSAGES

Moving components

4.2. INTENDED USE

 Clamping device for mounting on a machine intended to perform milling operations.
 For clamping workpieces in the blank or partially machined state.
 Clamping different workpieces by different versions and top jaws.
 Use only when correctly mounted and with safety devices and guards on the machine opera-
tional.
18
4
3
2
5
5 Spindle nut, right-hand thread (fixed or
pivoted)
A Width
B Length
C Height
Crush hazard between workpiece and top jaws.
» During the clamping process, do not reach between
the top jaws or the moving components.
» Wear close-fitting work clothing, safety gloves, safety
glasses and safety shoes.
Instruction manual