Cleaning & Maintenance - hergom ARCE Mode D'emploi

Deflector plate
The top of the fireplace is protected by a steel
deflector.
To remove when cleaning of the oven, lift and
move to the left, then turn and remove it from
its fixtures. If you wish to reinstall it, perform the
same steps in reverse order (Fig. 5).
FIG. 5 - DISASSEMBLING THE DEFLECTOR
5 - CLEANING & MAINTENANCE
FRONT, PAINTED STEEL DOORS, SHEET METAL
COATINGS
Cleaning should be performed when the stove is
cold. Always use a dry cloth to avoid possible rust.
THE GLASS PANE
Cleaning
Fireplace window cleaning liquids are effective
products. Never try to clean the glass while there is
a fire in the fireplace.
We recommend Hergóm glass cleaning liquids,
which can be acquired from our distributors, given
their proven efficiency.
Replacing.
The glass parts in your oven are made of thermal
material, especially manufactured for log stoves.
In the event of accidental breakage, replace by
another pane with the same specifications. Contact
our Distributor to provide you with the appropriate
glass pane, together with instructions on how to
assemble and seal it.
STAINLESS STEEL OVEN
There are a number of appropriate products on
the market that will help you keep stainless steel
looking like a mirror. Avoid using tools that may
scratch steel. For stainless steel to preserve its
properties, its surface must not be damaged.
ASH
The cast iron fireplace includes an ash pan below
the hearth.
To eliminate the ash, withdraw the cast iron tray
using a protective glove, and remove it from the
fireplace to facilitate the cleaning operation.
Sweep the ash using a scraper or brush towards
the ash pan. Open the fireplace door and remove
the ash pan from its housing and remove the ash.
CHIMNEY
We recommend you inspect and clean the chimney
at least once a year, preferably at the start of the
season.
To facilitate cleaning, the oven can be removed
using the screws that fasten the front frame. This
operation must be performed by a professional.