40
8.13 ANTI-CONDENSATION SWITCH
This appliance has the option to switch
EN
from an electronic ignition pilot to a
standing pilot for cold climates. The
anti condensation control switch is
located between the side spacer and
the main viewing door frame. Use
a latch key to switch the pilot from
one mode to the other.
8.14 AIR CONTROL
•
This appliance has a dual zone control
system, which allows you to control which
room the hot air is directed.
•
Insert a door latch key into the door and the
top spacer on either side of the appliance.
•
Slide the air control rod into the desired
position.
Note: Having the air control rod centered will
distribute air evenly between both rooms.
Sliding the air control left or right directs
more or less air into the desired room.
W415-1406 / 11.19.14