Remove The Side Panels; Reattach The Side Panels; Access Your Cables - StarTech RK4236BKB Guide De L'utilisateur

Remove the side panels

1. If the side panels are locked, use the provided side-panel keys to unlock the panels.
2. Pull the two tabs on the side panel towards the center of the panel.
3. Lift the side panel free from the enclosure cabinet.
4. Repeat steps 1 to 3 to remove the other side panel.

Reattach the side panels

1. To put the side panels back on the enclosure cabinet, place one of the side panels in
the groove at the bottom of the enclosure.
2. Pull the two tabs on the side panel towards the center of the panel, push the top
part of the side panel into the enclosure cabinet, and release the tabs.
3. Use one of the provided side-panel keys to lock the side panel.

Access your cables

Both the top and bottom panels of the enclosure cabinet have cable access covers that
you can remove to access and manage your cables.
1. To take off a cable access cover, use a Phillips type screwdriver to remove the two
screws on both ends of the cable access cover.
2. Pull the cable access cover away from the enclosure cabinet.
To put the cable access cover back on, place the cover over the cable access opening
and use a Phillips type screwdriver to insert the screws through the cover and into the
enclosure cabinet. Tighten the screws.
Instruction manual
4