Reverse The Front Door - StarTech RK4236BKB Guide De L'utilisateur

Reverse the front door

To accommodate different rack configurations, you can reverse the front door of the
enclosure cabinet so that it opens to the left or right. The front door of the enclosure
cabinet is attached with levers that are located at the top and bottom of the front door.
1. In the top corner of the inside of the front door, pull the lever down and move the
top corner of the front door away from the enclosure cabinet. (figure 2)
2. In the bottom corner of the inside of the front door, pull the lever up and remove
the front door from the enclosure cabinet.
3. Flip the front door so that the levers are located on the opposite side.
4. Position the front door so that the top and bottom levers are aligned with the
washers located in the hinge area of the enclosure cabinet.
5. In the top corner of the front door, pull the lever down and release it into the washer
and hole in the enclosure cabinet.
6. In the bottom corner of the front door, pull the lever up and release it into the
washer and hole in the enclosure cabinet.
figure 2
Instruction manual
5