Familiarise Yourself With The Appliance; The Control Panel; The Hotplates; Residual Heat Indicator - NEFF T4 D 0 Série Notice D'utilisation

Masquer les pouces Voir aussi pour T4 D 0 Série:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 49

Familiarise yourself with the appliance

These instructions for use are applicable to other hobs. On
page 2 an overview of the models is provided, along with
information on measurements.

The control panel

Control surfaces
Pressing a symbol activates its corresponding function.

The hotplates

Hotplate
$
Single hotplate
æ
Grill zone
¹
Resistive plate-warming zone*
* Turning on the hotplate: The corresponding indicator lights up.
** The residual heat warning light comes on.
Only use pans suitable for induction cooking, see the "Appropriate cookware" section.

Residual heat indicator

The hob has a residual heat indicator for each hotplate to show
those which are still hot. Avoid touching a hotplate that displays
this.

Programming the hob

This section will show you how to program the hotplates. The
table contains power levels and cooking times for several
dishes.

Switching the hob on and off

The hob is turned on and off with the main switch.
#
To switch on: press the
main switch lights up. The hob is ready for use.
70
&RQWURO SDQHO IRU
³ FKLOGSURRI ORFN
&RQWURO SDQHO IRU
PDLQ VZLWFK
Turning on and off
Use a correctly sized pan.
The hotplate turns on automatically when a pan the same size as its outer
edges is placed on it.
Press the
symbol. The indicator above the
,QGLFDWLRQV IRU
SRZHU OHYHO³É
IXQFWLRQDOLW\ ¯
UHVLGXDO KHDW ‡¤
SRZHUERRVW IXQFWLRQ Æ
&RQWURO SDQHOV IRU
SRZHU OHYHO VHOHFWLRQ
Notes
The settings will not change if several symbols are pressed at
the same time. This enables the programming zone to be
cleaned when food is spilt.
Always keep the control surfaces dry. Moisture can affect
proper functioning.
symbol.**
Even when switched off, the
the hotplate remains hot.
If the pan is removed before the hotplate is turned off the
indicators and the selected power level will appear alternately.
To switch off: press the
main switch disappears. All hotplates are off. The residual heat
indicator stays on until the hotplates have cooled down
completely.
Note: The hob switches off automatically when all the hotplates
are switched off for more than 20 seconds.
&RQWURO SDQHO
IRU
´ SODWHZDUPLQJ
]RQH
œ
/
light will remain on as long as
#
symbol until the indicator above the
œ
/

Publicité

Table des Matières
loading

Table des Matières