User Level - Ecolab Versatronic Notice D'utilisation

10.3

User level

In the user level, the main parameters of the respective measurement and control channel
are clearly displayed. This allows an easy and fast configuration.
The user level is only displayed in the device menu when a notification has
been performed previously by an operator or master.
(See
The dialogue for entering is called up by touching the display panel of a desired data
point.
Fig. 18: View example user level
10.3.1 Versatronic Standard
Configuration
point
Ch. X designation
Ch. X unit
(Not at pH and ORP)
Ch. X type of
measurement
(Only pH and ORP)
Ch. X Beg. Display
range
Ch. X end Display
range
Ch. X AL1 alarm type *Inactive
Ch. X Al1 limit
Ch. X Al2 Alarm Type *Inactive
Ä Chapter 10.1 'Log-on / log-off' on page 41.)
Selection/configuration
Text box
mS/cm, µS/cm
(With Cr or Ci-measurement)
or text field
(At Cl, Cd, PA measurement)
*pH Standard
pH Antimon
pH ISFET
*Redox (ORP)
Amoniak
* = please select only the marked points!
-99999 to 99999
-99999 to 99999
*Min. alarm
*Max alarm
Alarm window
Alarm window inverted
* = please select only the marked points!
-99999 to 99999
*Min alarm
*Max. alarm
Alarm window
alarm window inverted
* = please select only the marked points!
Explanation
Channel. X Change Name Name
Selecting the unit
Choosing the type of
measurement
Setting initial display area IN 0.0000
Determining the end of the
display area
Enable Alarm 1,
Set the alarm type
alarm 1
Setting the limit
Enable Alarm 2
Set the alarm type
43
Device menu
Default
Cr measurement: S /
cm
Ci-measurement: mS /
cm
Cl- measurement: mg /
l
pH standard
Cr measurement, Ci-
measurement: IN
500.00
pH / ORP (redox)
measurement: 14,00
Cl, Cd, PA
measurement: 20,00
Inactive
0,0000
Inactive
417102279 Rev. 2-08.2020