Technical Specifications - Kerbl Air Buddex Mode D'emploi

5 Replacing the tip (Fig. B)
5.1 Caution: allow the appliance to cool down completely. The tips can be replaced easily by
loosening the tip holding screw and removing the tip. Attach the new tip and secure it with
the holding screw.
6 Replacing the spare nozzle (Fig. C)
6.1 Unscrew the burner using an 18 mm universal open-end wrench and remove it (i).
6.2 Hold the base of the burner with a 15 mm open-end wrench (ii) and unscrew the gas nozzle
with the O-seal using a 4 mm Allen key (iii).
6.3 Screw the new gas nozzle in and tighten it. Take care not to tighten it too much.
6.4 Reinsert the burner and secure it with the 18 mm universal open-end wrench and moderate
force to establish a tight connection (i).

7 Technical specifications

Length: 310 mm
Weight: 675 g
Heating time: 3 minutes
Working temperature: adjustable up to 650 °C
Service life: 45 minutes on a moderate setting
Gas: butane canister
FIG. C
FIG. C
10