Eschenbach mobilux DIGITAL Touch HD Mode D'emploi page 40

Using the mobilux DIGITAL Touch HD on the computer
You can transfer the live image from the reader onto your computer screen. To do this, you must first install
the "mobilux Digital" software supplied onto the computer. The installation guide can be found on the pre-
installed SD card. The following operating systems are required for running mobilux Digital: Windows Vista,
Windows 7, Windows 8 or Windows 10. mobilux Digital may also run on other Windows platforms, but this
cannot be guaranteed. We can accept no liability for the data integrity of computers running operating sys-
tems other than those mentioned here.
3 USB functions
If you connect the reading device to a computer USB connection and switch it on, you will see the following 3
symbols on the reading device display:
- 40 -