ASCOM Office 40 Mode D'emploi page 125

Programming your telephone
Editing text display in idle state
The text field available can be used, for example, to display the telephone number or the
name of the company on telephones which are often used by several people.
Text
Programming the Foxkey (programmed menu items)
You can have six frequently used names/numbers appear on the display; three in the idle
state display and three in the feature menu 2.
Foxkey Entry 1_3
Cont Entry 4_6
ß ¥
Notes The "|" symbol indicates that the function is activated.
A "Long clic" of the Foxkey advances the program directly to the programming
mode for this key.
Entry 4 is used by default for "Tone_dial_mode".
Changing the password
Code
Ok
Ok
20317861en_bat_a0
In the Programming mode, press the Foxkey
Ok
under "Text", enter text, and save it by pressing
the Foxkey under "Ok".
Return to the initial state by pressing the END
key.
END
In the programming mode press the Foxkey
under "Foxkey" and select the desired entry
(Entries 1-3 are in the idle state display; Entries
4-6 are in the feature menu 2; call up with the
Foxkey under "Continue").
Press the Foxkey under "ß ¥" to select the
OK
desired key type ("Number key" or "Function
key") and confirm with "Ok".
OK
Enter number/name or select key function (such
as "Diversion" or "Prog. fct" i.e. Programming
function) depending on the type of key selected
and confirm with the Foxkey under "Ok".
Ok
In the programming mode, press the Foxkey
under "Code", enter the old password (initially
"0000") and confirm with "Ok". Enter the new
password, confirm by pressing the Foxkey under
"Ok", enter the new password again and
confirm by pressing the Foxkey under "Ok" to
save the password. Press the END key to return
to the initial state.
END
17