Call Waiting - ASCOM Office 40 Mode D'emploi

Using the extended-feature functions
Call back
You request a call back from an internal subscriber whose line is busy or who is not
answering.
Call–back
Note Only one call back can be activated at a time.

Call waiting

To alert a busy subscriber to your call by using the "Call waiting" tone and an appropriate
display.
Call–waiting
Note If the called party rejects your call, the connection will be disconnected.
1)
Paging
To page a person directly or after trying to telephone him.
Page
MENU MENU
1) Depends on the PBX-type
8
Press the Foxkey under "Call_back"; you will
hear the confirmation tone. After replacing the
handset, you will see "Call expected from" on
the display and the number/name of the
Reset
corresponding subscriber. You can press the
Foxkey under "Reset" to cancel the requested
call back.
Press the Foxkey under "Call_waiting".
Press the Menu Key repeatedly until "Page"
appears. Press the Foxkey at this position and
enter the number of the person sought.
Ok
Confirm with "Ok".
20317861en_bat_a0