18.3 Setting the parameters
Retrieving the settings
Tap the following buttons in turn:
19 Taking the machine out of service for a long period
Follow the notes if the machine needs to be out of operation for a long duration (holidays, seasonal
business).
Empty the machine using the self-cleaning programme ( 8.1.2).
Clean the machine ( 8.1.3 and 8.1.4).
Leave the hood open.
Close the on-site water stop cock.
Switch off the on-site mains disconnector.
If the machine is in a place that is not frost-free:
Instruct an authorised service technician to make the machine frost-resistant.
20 Putting the machine back into service after a long period of disuse
Open the on-site water stop cock.
Switch on the on-site mains disconnector.
Switch on the machine.
If the machine was in a place that was not frost-free:
After extended periods of disuse, the machine must be completely climatised (at least 24 hours at 25 °C). If
this requirement is met:
Contact an authorised service technician to put the machine back into service.
Taking the machine out of service for a long period
Type in "1575"
INFO
Incorrectly entered digits
can be corrected with the
button.
Using the scroll buttons (4), set the value of parameter
P704.
Press the button (3) to save your input.
Press the scroll button (1) if parameter P709 must also
be set.
P709 is displayed.
Using the scroll buttons (4), set the value of parameter
P709.
Press the button (3) to save your input.
Press the back button (2) to exit from the menu.
GB
79