Connecting The Mains Cable; Establishing An Earth Connection - Miele professional PG 8172 Mode D'emploi

17.1 Connecting the mains cable

Requirements for the mains cable
 Cable type: Type H07 RN-F or equivalent
 The wires must be fitted with wire end ferrules.
 Cross section and number of cores: suitable for on-site power and protection
for more information see the sticker in the front panel
Connect the mains Withdraw the mains
cable to the rear of the cable at the front and
machine. route it to the left.
If necessary plug bridges. Connect the green-yellow
Firmly press the bridges wire to the distributor of
with a screwdriver. the earth wires.

17.2 Establishing an earth connection

 Connect the machine into the on-site equipotential bonding system.
INFO The terminal screw is located behind the right rear leg of the machine. It is identified with the
symbol.
Follow the connection Connect the wires of the
diagram ( 17.3). mains cable according
to the connection
diagram.
Attach the mains cable to
the mounting plate with a
cable tie for strain relief.
Electrical connection
Close the quick release
connectors.
75
GB