Servicing And Maintenance; Daily Cleaning - Miele professional PG 8172 Mode D'emploi

Servicing and maintenance

8 Servicing and maintenance
 Do not spray the machine and the surrounding area (panels, base) using a water hose,
steam-jet air ejector or high-pressure cleaner.
 Ensure that the base of the machine is not flooded when cleaning the floor in order to
Warning
prevent an uncontrolled inflow of water.
Wear protective clothing and protective gloves before touching parts in contact with wash water
(filters, spray arms, ...)
When cleaning the machine Interior, wear protective gloves to avoid injury caused by sharp-
Warning
edged trays.

8.1 Daily cleaning

8.1.1 During operation
Remove the filter cylinder, clean if necessary and re-insert it.
8.1.2 Self-cleaning programme at the end of the working day
The machine is equipped with a self-cleaning programme that assists you when you are cleaning the inside
of the machine. After the first programme step, the self-cleaning programme is interrupted so that you can
remove the filter cylinder and the tank cover and clean them. If you do not follow this step, the self-cleaning
programme will continue automatically after 30 seconds.
 Proceed in accordance with Figures B1 to B27.
54