Electrical Connection; Possible Settings - Miele professional PG 8172 Mode D'emploi

External dispenser pumps

18.2 Electrical connection

IMPORTANT maximum current drain at the connector strip: 0.5 A.
 Connect the external dispenser pump to the 5-pin plug.
Terminals (arranged from top to bottom)
Terminal
L1
N
Rinse (O18)
Wash (O20)
Fill / Water
(O17)
a) Hood / door closed
b) Minimum water level in the tank
c) Not in the self-cleaning programme
d) Not while the machine is filling
e) Not in descaling or basic cleaning programme
The parameters P704 and P709 control when a voltage is present at the fill and rinse terminals.

Possible settings

P704 Use
0 for dispenser pumps installed outside the machine
1 for dispenser pumps installed outside the machine
2 for dispenser pumps installed outside the machine
3 for internal dispenser pumps
P709 Use
0 for dispenser pumps installed outside the machine
1 not used
2 for internal dispenser pumps
78
Voltage is on
Continuous voltage
parallel to solenoid valve (O7)
 while the machine is filling.
 during rinsing.
while the circulating pump is running
while the machine is filling.
parallel to solenoid valve (O7)
 while the machine is filling.
 during rinsing.
Condition Restriction
P709 = 0
c)
a)
a) c), d), e)
P704 = 0
a), b)
P704 = 1
a), b)