Installation; Turning On; Use - PAJ FINDER Notice D'utilisation

Please always observe the manufacturer's
specifications for your vehicle. Compensation
claims due to incorrect connections are hereby
excluded.

2.5 Installation

Please proceed as follows when connecting the
Finder to your car battery. The following figure serves
as a guide.
1. Connect the MOTORCYCLE Finder to the cable
harness using the black plug-in function.
2. Connect the device to the battery. Connect
cable with the fuse to (+).
to Minus (-).
Attention! The poles must never be reversed.
Note: When connected to the power supply, the
MOTORCYCLE Finder switches on immediately
and the LED lights emit a signal.
1.
Fuse
the red
Connect the black cable
2.
Black
Battery
2.
12-24V
Red
MOTORCYCLE Finder by PAJ with Online-Tracking V.1.1 EN
© PAJ UG (haftungsbeschränkt)

2.6 Turning on

After a successful activation you can switch on the
MOTORCYCLE FINDER. By connecting the FINDER to
the power supply the device has already been
switched on.
For the initial startup of the MOTORCYCLE Finder
uncovered locations, such as the garden or the
terrace (i. e. not inside the home, the garage, the
cellar or the like) are recommended.

2.7 Use

Once the activation, switching on and the transfer of
a first database has been successful, you can attach
the FINDER to a location of your choice and view the
position of the FINDER using a smartphone, tablet or
PC. Please use our app or go to the following website:
www.finder-portal.com
The portal will support you step by step in its
17
functions.