Güde GHD 100 Mode D'emploi page 19

Assembly of high-pressure cleaner GHD 140 #86011
Mount the high-pressure hose (picture D15/11) on the
spray gun (picture C1+C2). Now connect the spray gun to
the lancet (picture C8+D9).
Now connect the high-pressure hose (picture D15/11) to
the hose connector (picture B15/6) on the high-pressure
cleaner (picture C/3+4).
Screw joints on all connecting hoses must be tight.
Assembly of high-pressure cleaner GHD 160 #86013
Mount the high-pressure hose (picture E8) on the spray
gun (picture E6) (picture E15/E16). Now connect the
spray gun to the lancet (picture E14)
Screw joints on all connecting hoses must be tight.
Operation
Always position the device onto a firm and level surface.
Never either tilt the device or move it while the engine is
running.
High-pressure cleaner GHD 100 #86009 operation
Startup
• Open the water faucet
• Plug the device into the grid
• To switch the high-pressure cleaner on, press
the on/off button (picture B15/1) (picture B11)
•
Release the safety lock for transportation
(picture B15/9) and pull the trigger (picture A3)
Halt
•
Release the trigger and put the safety lock in
place (picture A4)
•
To switch the high-pressure cleaner off, press
the on/off button (picture B15/1) (picture B11)
•
Close the water tap
• Upon the completion of the work or before
extensive pauses, unplug the feed cable from
the grid
Water spray adjustment
• The spray lancet has various operating modes
which can be changed by rotating the nozzle
(picture B12)
Adjust the device settings only in the off-state!
Detergent usage (picture B13 + B14)
Only use detergents which are suitable for high-pressure
cleaners.
•
Turn the high-pressure cleaner off
•
Pour the detergent into the detergent container
and attach it to the spray gun according to
pictures B13+B14
High-pressure cleaner GHD 140 #86011 operation
Startup
• Open the water faucet
• Plug the device into the grid
• To switch the high-pressure cleaner on, press
the on/off button (picture D15/1) (picture D11)
•
Release the safety lock for transportation
(picture D15/9) and pull the trigger (picture
C5+C6)
Halt
•
Release the trigger and put the safety lock in
place (picture D15/9) (picture C5+C6)
•
To switch the high-pressure cleaner off, press
the on/off button (picture D15/1) (picture D11)
• Close the water tap
• Upon the completion of the work or before
extensive pauses, unplug the feed cable from
the grid
Water spray adjustment
•
The spray lancet has various operating modes
which can be changed by rotating the nozzle
(picture D12)
Adjust the device settings only in the off-state!
Detergent usage (picture D13 + D14)
Only use detergents which are suitable for high-pressure
cleaners.
•
Turn the high-pressure cleaner off
• Pour the detergent into the detergent container
(picture D13 + D14)
• Adjust the operating mode of the lancet to a low-
pressure fan-like spray (for use with detergents)
High-pressure cleaner GHD 160 #86013 operation
Startup
• Open the water faucet
•
Plug the device into the grid
•
To switch the high-pressure cleaner on, press
the on/off button (picture E1)
•
Release the safety lock for transportation
(picture E17+E18) and pull the trigger
Halt
•
Release the trigger and put the safety lock in
place (picture E17+E18)
•
To switch the high-pressure cleaner off, press
the on/off button (picture E1)
• Close the water tap
• Upon the completion of the work or before
extensive pauses, unplug the feed cable from
the grid
Water spray adjustment
•
The spray lancet has various operating modes
which can be changed by rotating the nozzle
(picture D12)
Adjust the device settings only in the off-state!
Detergent usage
Only use detergents which are suitable for high-pressure
cleaners.
• Turn the high-pressure cleaner off
• Pour the detergent into the detergent container
(picture E3)
• Adjust the operating mode of the lancet to a low-
pressure fan-like spray (for use with detergents)
Warranty
The warranty applies exclusively to material defects or
manufacturing defects. When enforcing a complaint during
the warranty period, attach the original purchase document
showing the purchase date. Excluded from warranty is
unqualified use such as device overloading, forcible use,
damage inflicted by a third party or a third party object.
19