Install Setting Menu - Sony VPL-BW7 Mode D'emploi

INSTALL SETTING Menu

The INSTALL SETTING menu is used for changing the settings of the projector.
INSTALL SETTING
V Key s t o n e : Au t o
I m ag e F l i p : O f f
B a ck g ro u n d : B l u e
L a m p M o d e : S t a n d a rd
High Altitude Mode: O f f
S t a n d by M o d e : L ow
Setting items
V Keystone
Image Flip
Background
Selects the background color of the screen when no
signal is input.
Select "Black" or "Blue." Normally, set to "Blue."
Lamp Mode
High Altitude
Mode
Standby Mode
42
GB
Input-A
Functions
Corrects the trapezoidal distortion caused by the
projection angle.
Select "Auto" for automatic correction, or "Manual" for
manual correction using the M/m/</, buttons.
When the bottom of the trapezoid is longer than the
top : Sets a lower value.
When the top of the trapezoid is longer than the
bottom : Sets a higher value.
Flips the image on the screen horizontally and/or
vertically.
HV: Flips the image horizontally and vertically.
H: Flips the image horizontally.
V: Flips the image vertically.
Off: The image does not flip.
Sets the lamp brightness used during the projection.
High: Illuminates the projected image brightly.
Standard: Reduces fan noise and power consumption.
The brightness of the projected image will be lower
compared with the "High" setting.
Set to "On" when the projector is used at an altitude
of 1,500 m or higher.
Lowers the power consumption in Standby Mode.
Select "Low" to lower power consumption during standby.
Initial setting
Auto
Off
Blue
Standard
Off
Low