SATA HKU Mode D'emploi page 12

SATA HKU | 12
9. Warranty
During the period of twelve (12) months from the date of original
purchase SATA will repair or, replace the product without charge
for parts or labour subject to the following conditions. The warranty
covers the value for production parts or defects in material dur-
ing the warranty period. The warranty does not include damages
caused by improper handling, normal wear and tear, mechanical
damages, faulty assembly, improper maintenance, unusual spray
materials, substitute materials, chemicals such as alkaline solu-
tions and acids, electro-chemical or electric influences, as far as
this damage is not the result of any error committed by us. Abrasive
spray material such as red lead and liquid grinding material etc.
reduce the lifetime of valves, packings, guns and nozzles. Wear
and tear damage caused by this are not covered in this warranty.
Units should be inspected upon delivery by the consumer. Obvi-
ous damage must be reported within 14 days of receipt of the unit
to the supplier to avoid loss of the right to claim notice of defects.
Additional claims such as compensation are excluded. This refers
as well to damages caused during meetings , training sessions, or
demonstrations. Should the consumer require immediate repair or
replacement before a determination of whether the affected unit
is covered by the warranty, the repair or the replacement will be
made and charged at the current prices. If it is determind that the
item is covered by the warranty, a credit will be issued for the repair
or replacement. Replaced parts become the property of SATA or
their distributor. Notice of defects or other claims do not entitle
the consumer to delay or refuse payment. Returned merchandise
to SATA must be sent prepaid. All service charges, freight and
handling charges are to be paid by the consumer. The charges
made will be in accordance with the currently existing pricing.
Suretyships may not prolong the warranty period. This warranty
terminates upon unauthorized inference.
ATTENTION!
When using solvents and cleaning agents based on
halogenated hydrocarbons e.g. 1.1.1-trichlorethylene
and methylene chloride, chemical reactions can occur on
the aluminium cup, gun and on galvanized components
(small quantities of water added to 1.1.1-trichlorethyelene
produce hydrochloric acid). This can cause oxidation of the
components; in extreme cases, the reaction can be explosive.
Therefore only use solvents and cleaning agents for your
paint gun which do not contain the substances named above.
You must never use acid, alkaline solutions / Iye or stripping
agents for cleaning.
Important Note
Never point paint spray guns at yourself, at other persons or ani-
mals. Solvents and thinners can cause burns. Only the respec-
tive quantities of solvents and paints required for work progress
may be present in the direct surroundings of the unit (after work,
solvents and paints are to be returned to their assigned storage
rooms). Prior to any repair work the unit must be disconnected
from the air supply. Prior to putting the unit into operation,
especially after each cleaning and each repair work, check
all screws and nuts for tight fit, as well as the sealing per-
formance of the spray guns and hoses. Defective components
must be replaced or repaired accordingly. To obtain best pos-
sible coating results, and for maximum safety, only use original
spare parts. No sources of ignition (e.g. open flames, burning
cigarettes, lamps without ex-protection etc.) may be present dur-
ing painting, as easily flammable mixture are generated during
the painting process. Occupational safety regulations must be
applied when painting (respiratory protection, etc.). Appropriate
ear protection muffs are required, as a sound level of 90 dB(A) is
exceeded when coating with higher pressure levels. No vibration
is transmitted to the upper parts of the operator's body during
work with the paint spray gun. Recoil forces are negligible.
The use of this product in explosion hazard zones classified
in Category O is prohibited.
EN