Panasonic CF-VCBC11U Instructions D'utilisation page 5

interference to other devices in the vicinity. However, there is no
guarantee that interference will not occur in a particular installation.
If this product does cause harmful interference to other devices,
which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more
of the following measures:
• Reorient or relocate the receiving device.
• Increase the separation distance between the equipment.
• Connect the equipment into an outlet on a circuit different from
that which the other device(s) are connected.
• Consult the Panasonic Service Center or service technician for help.
< Manufacture's Declaration for EMC >
Table 1, Table 2, Table 3 and Table 4 describe the intended use
environment and EMC compliance levels of the system. For
maximum performance, ensure that the system is used in the
environments described in those tables.
The equipment is intended for use in the electromagnetic
environment specified in those tables.
Table 1
Guidance and manufacturer's declaration-electromagnetic emissions
CF-VCBC11U is intended for use in the electromagnetic environment specified below. The
customer or user of the CF-VCBC11U should assure that is used in such an environment.
Emission test
RF emissions
CISPR11
RF emissions
CISPR11
Harmonics emissions
IEC61000-3-2
Voltage fluctuations/Flicker
emissions
IEC61000-3-3
Compliance Electromagnetic environment-guidance
The CF-VCBC11U uses RF energy only for
its internal function. Therefore, its RF
Group 1 emissions are very low and are not likely to
cause any interference in nearby electronic
equipment.
Class B
The CF-VCBC11U is suitable for use in all
establishments, including domestic
Not applicable establishments and those directly connected
to the public low-voltage power supply
network that supplies buildings used for
Complies
domestic purposes.
E
5