Indicators - Panasonic CF-VCBC11U Instructions D'utilisation

Indicators

The power indicator on the battery charger lights green when the
●
power is being supplied (when the adaptor is connected).
Battery indicator
●
Orange :
Green :
Blinking red :
Blinking orange :
Not lit :
You can make the setting either to light
●
up the battery indicator or to flash it.
1. Connect the AC adaptor.
2. Remove the battery pack(s).
3. Turn the battery charger over.
4. Insert a pointed object (e.g., the
bent-out tip of a paper clip) into
the hole (A) and push it to the end
for several seconds.
Each time you push the hole, the setting switches between
lighting and flashing.
CAUTION
Do not use the pens supplied with the computer.
●
Charging
Fully-charged
Battery pack or charger may not be working
properly. Quickly remove the battery pack and
disconnect the AC adaptor, then connect them
again.
If the light continues to blink red, the battery
pack or charger may be faulty.
Charging has been temporarily terminated as
the internal temperature of the battery pack is
outside the range possible for charging.
Charging will start automatically when the
temperature is restored to within this range.
Please wait.
Battery pack is not properly inserted or charging
has not yet started (waiting to charge).
To check if the battery pack is properly inserted,
remove the battery pack to be checked and
attach it again. If the battery indicator blinks
several times after attaching, the battery pack
has been properly attached.
E
A
11