The W/B Adjust Menu - Sony VPL-X2000U Manuel D'installation

The W/B ADJUST Menu

The W/B ADJUST menu sets the values of the
COLOR TEMP in the PICTURE CTRL menu.
S W/B ADJUST
HIGH
LOW
SAVE TO MEMORY
Operation
1. Select the COLOR TEMP item to be set
Use the V or v key to select HIGH or LOW, then press
the b or ENTER key.
The projector enters into GAIN/BIAS adjustment
mode.
HIGH
GAIN
R: 1 2 8
G: 1 2 8
B : 1 2 8
2. Select the item to be adjusted
Use the v key to select the item.
Each time the v key is pressed, the selected color item
appears in the following order.
R (GAIN) → G (GAIN) → B (GAIN)
↑
B (BIAS) ←G (BIAS) ← R (BIAS)
3. Adjust an item
To increase the number, press the b key.
To decrease the number, press the B key.
4. Restore the original screen
Press the ENTER key.
The original screen is restored.
To cancel the adjusted values
Turn off the projector. The saved data in the memory
will be retrieved when the projector is turned on again.
INPUT-A
INPUT-A
↓
HIGH
Changes the color temperature of the COLOR TEMP's
HIGH setting value in the PICTURE CONTROL
menu.
HIGH
GAIN
R: 1 2 8
G: 1 2 8
B : 1 2 8
LOW
Changes the color temperature of the COLOR TEMP's
LOW setting value in the PICTURE CONTROL
menu.
LOW
GAIN
R: 1 2 8
G: 1 2 8
B : 1 2 8
SAVE TO MEMORY
Saves the settings of HIGH and LOW levels of
COLOR TEMP if you select SAVE TO MEMORY
with the V or v key and press the ENTER key.
S W/B ADJUST
HIGH
LOW
SAVE TO MEMORY
INPUT-A
INPUT-A
INPUT-A
61
(GB)