Stanley SG 5500 Traduction Des Instructions Originales page 12

G
B
Spark plug:
SG 5500
Generator type:
Protection type:
Continuous rated power Prated (S1):
Rated voltage Urated:
Rated current Irated:
Frequency Frated:
Drive engine design:
Single-cylinder forced air-cooled 4-stroke OHV
Displacement:
Fuel type:
Tank capacity:
Consumption at 2/3 load:
Weight:
Guaranteed sound power level LWA:
Power factor cos
Power class:
Spark plug:
The machine can be continuously operated with the
quoted power output.
The machine may be temporarily operated with the
quoted power output. Afterwards the machine must be
stopped for a while to prevent it from overheating
1 Tank indicator
2 Fuel cap
3 230 V~ socket-outlets
4 400 V~ socket outlets (only for SG 5500)
5 12 V d.c. outlet (not for E-SG 2200)
6 Earth connection
7 Overload cut-out
LG F6TC
Synchronous
IP 23
3.6 kW
3* 230 V~ / 400 V ~
5.2 A
50 Hz
3
389 cm
Normal unleaded petrol
25 l
o
/<0 C: 5W30)
1451g/h
91 kg
97 dB(A)
1
G1
LG F6TC
12
8 Voltmeter (not for E-SG 2200)
9 Oil drain plug
11 Oil shortage cut-out
12 On/Off switch
13 Choke lever
14 Pull cord
15 Electro starter (only for E-SG 4000, SG 4200 and SG
5500)
16 Petrol cock
17 Wheels (only for SG 3000, SG 4200 and SG 5500)
18 Carry handle
19 Rubber feet (not for SG 2200, E-SG 2200 and E-SG
4000)
20 Battery (only for SG 4200 and SG 5500)
21 Transport handles
23Spark plug wrench set
24 Push bar assembling set ( not for E- SG 2200, E-SG
4000 and SG 2200)
25 Wheel assembling set ( not for E SG 2200, E- SG 4000
and SG 2200)
26 Spanner
27 DC oulet adapter cable
29 Spark plug
31 230 V~ / 400V ~transfer switch ( for SG 5500 only)
4000 and SG 2200)
33 Electro starter key
1. First place one end of the bolt (item 25) through the
hole in the frame and secure it with a nut and washer.
2. Put the socket through the another end of bolt (item
25) and place the wheel, washer and secure it with the
nut.
3. Place the wheel cover and secure it via clip as
designed on the innder side of cover.
4. Assemble the left side wheel with same prodcedure