Interface Parameters; Data Transfer Mode - KERN FCB Série Mode D'emploi

9.4 Interface parameters

Data output is carried out via interface RS 232 C.
General
The previous condition for the data transfer between balance and a peripherical
device (e.g. printer, PC ...) is that the appliances are set to the same interface
parameters (e.g. baud rate, transfer mode ...).
Data transfer
mode
 In weighing mode keep the PRINT key pressed until [Unit]
0.0
g
 Press the MODE button several times until „Pr" is displayed.
Vn� T
 Acknowledge using SET key, the current setting is displayed.
PR�
 Select the desired settings by pressing the MODE key
rE CR
Pr PC
AU PC Continuous data output
bA Pr
AU Pr
 Use the SET key to confirm selection. The balance returns to
FCB-BA-e-1614
appears.
Data output via remote control commands
Data output using the PRINT key
Output on bar code printer
Autom. data output of stable weighing values
weighing mode.
31