KERN FCB Série Mode D'emploi page 73

rE Cr:
The remote control commands s/w/t are sent from the remote control unit to the
balance as ASCII code. After the balance having received the s/w/t commands, it will
send the following data.
Take into account that the following remote control commands must be sent
without a subsequent CR LF.
s Function:
w Function:
t Function:
h. Format for stable values for weight/quantity/percentage
1 2 3 4
*
B B B B
i. Format in case of fault
1 2 3 4
B B B B
j. Format for unstable values for weight/quantity/percentage
1 2 3 4
*
B B B B
Symbols
*
B Blank or M
B / 0 /. Blank / weight values / decimal dot, depending on weighing value
g Weight unit / pcs / %
E, o, r ASCII code or "E, o, r"
CR Carriage return symbol
LF Line feed symbol
FCB-BA-e-1614
Stable weighing value for the weight is sent via the RS232
interface
Weighing value for the weight (stable or unstable) is sent
via the RS232 interface
No data are sent, the balance carries out the tare function.
5 6 7 8 9
B B B B B
5 6 7 8
B B B E
5 6 7 8
B B B B
10 11 12 13 14 15 16 17 18
0 . 0 B g
9 10 11 12
r r o r
9 10 11 12
B 0 . 0
B B CR LF
13 14
CR LF
13 14 15
B CR LF
35