Pullout Drawers; Durabase; Durabase Divider - KENMORE ELITE Grab-N-Go 795. 7316 Série Guide D'utilisation Et D'entretien

PULLOUT DRAWERS

Top Drawer
1. To remove, pull the drawer out to full extension.
Remove extra ice bin. Lift the back side of the top
drawer slightly to clear it from the rail system, then lift
the front side to remove the drawer.
2. To replace, with the drawer pulled out to full extension,
insert the top drawer in the rail assembly. Replace
extra ice bin.
Middle Drawer
1. To remove, first remove the top drawer. Then pull the
middle drawer out to full extension. Lift the front of
the drawer, then pull the drawer straight out.
2. To replace, slightly tilt up the front of the drawer,
insert the drawer into the frame, and push it back into
place.
WARNING: DO NOT use the top drawer without the
middle drawer in place to support it. The top drawer
will fall and may cause injury.

DURABASE

1. To remove the Durabase, push it to the back as much
as possible. Tilt up the front of the Durabase and pull
straight out.
2. To replace, insert the
Durabase in the rail
assembly.
NOTE: Assemble the Durabase before assembling
the middle drawer. The middle drawer needs
clearance in order to properly seat its rollers. If the
items are assembled improperly, the freezer door
may not close.

DURABASE DIVIDER

The Durabase divider allows
you to organize the Durabase
area into sections. It can be
adjusted from side to side to
accommodate items of different
sizes.
WARNING: If the Durabase divider is removed, there
is enough open space for children or pets to crawl
inside. To prevent accidental child and pet entrapment
or suffocation risk, DO NOT allow children or pets to
touch or go near the drawer.
29
USING YOUR REFRIGERATOR
1
2