Detaching And Attaching The Front Panel; Resetting The Unit - Sony MEX-XB100BT Mode D'emploi

Mounting the unit in the dashboard
Before installing, make sure the catches on both
sides of the bracket  are bent inwards 2 mm (
in). When mounting in a Japanese car, see
"Mounting the unit in a Japanese car" (page 36).
1
Position the bracket  inside the
dashboard, then bend the claws outward
for a tight fit.

2
Mount the unit onto the bracket , then
attach the protection collar .

CAUTION
Do not touch the left side of the unit when
removing from the dashboard. The heatsink on
the left side of the unit remains hot right after
use.
Notes
 If the catches are straight or bent outwards, the unit
will not be installed securely and may spring out.
 Make sure the 4 catches on the protection collar 
are properly engaged in the slots of the unit.
36
GB
182 mm (7 1 /
53 mm (2 1 / in)
8
Catch

Mounting the unit in a Japanese car
You may not be able to install this unit in some
makes of Japanese cars. In such a case, consult your
3 / Sony dealer.
32
TOYOTA

in)
4
Bracket
Existing parts supplied with
your car
NISSAN

Bracket
Existing parts supplied with
your car
Note
To prevent malfunction, install only with the supplied
screws .

Detaching and attaching the front panel

For details, see "Detaching the Front Panel"
(page 7).

Resetting the unit

For details, see "Resetting the unit" (page 7).
to dashboard/center console
Bracket
to dashboard/center console
Bracket

