Connecting Other Audio Components; Connecting To The Front Panel Audio - Pioneer SX-319V Mode D'emploi

03 Connecting up
Connecting other audio
components
The number and kind of connections depends
on the kind of component you're connecting.
Follow the steps below to connect a CD-R, MD,
DAT, tape recorder or other audio component.
This receiver
HDMI
BD/DVD
IN
IN
COAXIAL COAXIAL
TV/SAT
IN
IN IN 1 2
(CD) (CD)
OPTICAL OPTICAL
IN 2
(DVR/VCR)
OUT
IN 1 IN 1
(CD-R/TAPE) (CD-R/TAPE)
DIGITAL DIGITAL
1
OPTICAL COAXIAL
DIGITAL OUT
CD-R, MD, DAT, Tape recorder, etc.
Note
1 Note that you must connect digital components to analog audio jacks if you want to record to/from digital components (like
an MD) to/from analog components.
12
En
AUDIO AUDIO
OUT OUT CD-R/TAPE CD-R/TAPE IN IN CD IN
L L
R R
IR OUT DVR/VCR IN TV/SAT IN
L
ASSIGNABLE
R
SURROUND CENTER FRONT
L
LOOP
R
BD/DVD IN
ASSIGNABLE SUBWOOFER
1 - 2 BD/DVD MULTI CH IN
3 2
IN
R L R
REC
AUDIO IN AUDIO OUT
1 If your component has a digital output,
connect this to a digital input on the receiver.
The example shows an optical connection to
the DIGITAL OPTICAL IN 1 (CD-R/TAPE)
input.
1
2 If necessary, connect the analog audio
outputs of the component to a set of spare
audio inputs on this receiver.
You'll need to make this connection for
components without a digital output, or if you
want to record from a digital component. Use a
stereo RCA phono cable as shown.
3 If you're connecting a recorder, connect
the analog audio outputs to the analog audio
inputs on the recorder.
The example shows an analog connection to
the CD-R/TAPE analog output jack using a
ANTENNA
stereo RCA phono cable.
AM
Connecting to the front panel
audio mini jack
Front audio connections are accessed via the
front panel using the INPUT SELECTOR or
PORTABLE button on the remote control. Use
a stereo mini-jack cable to connect a digital
OUT
L
audio player, etc.
PLAY
MULTI-ZONE
CONTROL
PRESET + ENTER
ON/OFF
PORTABLE
AUDIO OUT
Digital audio player, etc.
MASTER
VOLUME