Making Recordings; Making An Audio Recording - Pioneer SX-319V Mode D'emploi

09

Making recordings

Chapter 9:
Making recordings

Making an audio recording

You can make an audio recording from the
built-in tuner, or from an audio or video source
connected to the receiver (such as a CD player
or TV).
Keep in mind you can't make a digital
recording from an analog source or vice-versa,
so make sure the components you are
recording to/from are hooked up in the same
way (see Connecting up on page 7 for more on
connections).
RECEIVER
RECEIVER
BD BD
CD CD
PORTABLE PORTABLE MULTI IN SIGNAL SEL
MIDNIGHT PHASE S.RETRIEVER
Note
1 The receiver's volume, balance, tone (bass, treble, loudness), and surround effects have no effect on the recorded signal.
36
En
INPUT SELECT SOURCE
ZONE 2
ON/OFF TV CONTROL
INPUT
TV TV DVR DVR
CH
CD-R CD-R TUNER TUNER
SIGNAL SEL
VOL
1 Select the source you want to record.
Use the MULTI CONTROL buttons (INPUT
SELECTOR).
2 Select the input signal (if necessary).
Press the RECEIVER button then press SIGNAL
SEL to select the input signal corresponding to
the source component (see page 29 for more
on this).
3 Prepare the source you want to record.
Tune to the radio station, load the CD, DVD etc.
4 Prepare the recorder.
Insert a blank tape, MD etc. into the recording
device and set the recording levels.
Refer to the instructions that came with the
recorder if you are unsure how to do this.
5 Start recording, then start playback of the
source component.
1