Max GS738C LT Manuel D'utilisation Et D'entretien page 4

3. WEAR THE CLOTHINGS AND A PROTECTIVE GEAR
SUITABLE FOR THE WORKING ENVIRONMENT
Depending on the working environment, wear a long-sleeve
work uniform and a protective gear such as a hard hat, safe-
ty shoes.
4. CAUTIONS FOR FUEL CELL
1 Be sure to set Fuel Cell.
2 Store Fuel Cell in well ventilated area.
3 Do not expose the Fuel Cell to the direct sunshine.
Do not place the Fuel Cell in a vehicle or a trunk where the
temperature could rise. It could explode. A used empty Fuel
Cell still contains a combustible jet gas, which could swell
and explode a container into pieces.
4 Store the Fuel Cell at ambient temperature of 49°C
(120°F) or lower.
The Fuel Cell contains the pressurized combustible gas. If
it is exposed to the temperature higher than 49°C (120°F),
the gas could leak from it or burst, resulting in a fire.
5 Do not breathe in the gas.
6 Do not incinerate or recycle the empty Fuel Cell.
7 Never jet the gas to the human body.
8 Do not remove the rubber plug from the bottom of the
Fuel Cell except at disposal.
9 Do not make a hole in the Fuel Cell.
5. CAUTIONS FOR CHARGING METHOD, THE CHARGER
AND THE BATTERY
1 Be sure to use MAX JP606H battery for the tool.
Be sure to use MAX JP606H battery. Never connect the tool
to a power source or other rechargeable battery, dry cells or
storage battery for automobiles.
Neglect of this could cause breakage, trouble, heat genera-
tion or combustion.
(See Page 10 for MAX JP606H battery)
4