Promac MDA-35Q Mode D'emploi page 16

Description
The magnetic core drilling machine can be fixed with a switchable electromagnet on ferromagnetic work pieces.
The electromagnet and the motor can be switched on and off with the large buttons of the control panel.
A self-adjusting dovetail guide on which the motor is mounted can be adjusted in height with the star handle. On
the back of the machine is the nameplate including the serial number.
A) Motor
B) Weldon-Arbor
C) Magnetic base
D) Recess for safety belt
16
E) Control panel
F) Star handle
G) Coolant unit
1 – Magnet ON
2 – Magnet OFF
3 – Motor ON
4 – Motor OFF