Fastening The Adjusting Rib To The Furniture Door (Freezer Compartment) - Gaggenau RY 492 Instructions D'installation

4. Remove furniture door.
5. On both lengths of the furniture door, draw a parallel
with the help of the positioning aid.
6. Lengthen the markings to the parallels using an
angle of contact.
7. Apply the fixing ribs (b) and mark out the holes.
8. Pre-drill the holes.
9. Screw on the fixing ribs (b).
10. Hang the furniture door on the threaded rods.
20
9. Fastening the adjusting rib to
the furniture door
(freezer compartment)
1. Measure distance A between the adjusting ribs and
the bottom edge of the refrigerator compartment
door.
2. Loosen the two nuts (a) and remove the adjusting rib
(b).
3. Mark this value A on the rear side of the furniture
door.
4. Determine the middle of the door and label it.
5. Rest the adjusting rib on the furniture door and align
to the markings. Mark the drill holes.
6. Pre-drill the holes.
7. Tightly screw the adjusting rib.