Assembling The Hood - Brandt BHB6601X Guide D'utilisation

2 / INSTALLING YOUR APPLIANCE
• •

ASSEMBLING THE HOOD

Warning
The hood must be installed in compli-
ance with all applicable regulations concern-
ing the ventilation of premises. In France
these regulations are described in DTU 61.1
from the CSTB. In particular, the evacuated air
should never be conveyed to a duct used to
evacuate smoke from appliances that use gas
or other combustible fuels. Unused ducts may
only be used after approval from a competent
specialist.
The minimum distance between the cooking
surface and the lowest part of the hood must
be 70 cm at least. If the instructions for the hob
installed under the hood specify a distance of
more than 70 cm, this requirement must be
respected.
Fixing to the wall
(Pic.3).
(Pic.3).
(Pic.4).
(Pic.5).
58
EN
Pic. 3
Pic. 4