Dab Mode - PERFECTPRO DIGITUBE Manuel De L'utilisateur

5. When the scan is completed, the 10 strongest FM stations will be stored as presets and the available DAB stations will be in the
list of stations. The radio will switch to standby with the updated clock and date showing on the display.
6. If no signals are found, the clock will not be updated. It may be necessary to relocate the radio to a position with better reception.
DAB MODE (DAB – DAB+)
Operating the radio – DAB
1. Carefully extend the antenna. Press the On/Off button to switch on the radio.
2. Select the DAB waveband by pressing the SOURCE button.
3. The first station in the list of stations found will be played. The display will show the station name. If the radio has been used
before, the last used station will be selected.
4. If no DAB signals are detected, "No stations" will be displayed. It may be necessary to relocate the radio to a position with better
reception. You should then carry out an auto scan to find stations, please refer to the section "Find new stations - DAB".
Selecting a station – DAB
1. Press the On/Off button to switch on the radio. The display will show "Connecting" and "Playing" for a few seconds.
2. Select the DAB waveband by pressing the Source button.
3. The display will show "Now tuning" for a few seconds.
4. The display shows the name of the radio station currently selected.
5. Press the TUNING or buttons to scroll through the list of available stations.
6. When the desired station name appears on the display, press the SELECT-INFO button to select the station.
Note: If after selecting a station the display shows "No stations", it may be necessary to relocate the radio to a position with better
reception.
9
Display modes – DAB
In DAB mode, the radio can display a range of information on the display.
Press the INFO button to cycle through the various modes.
a. Scrolling text Displays scrolling text message e.g. station information, artist/track name, phone-in number, etc.
b. Signal strength Displays the signal strength of radio reception. The clear unfilled rectangle indicates minimum signal
level required for satisfactory reception.
c. Program type Displays the type of station being listened to e.g. Pop, Classic, News, etc.
d. Multiplex name Displays the name of multiplex to which the current station belongs.
e. Channel & frequency Displays the channel number and frequency for the currently tuned DAB station.
f. Bit rate & audio format Displays the digital audio bit rate and audio format.
g. Time & date Displays the current time and date.
Finding new stations – DAB
From time to time, new stations may become available. You may proceed to find new stations as follows:
1. In DAB mode, press the MENU button, "Full Scan" shows on the display.
2. Press the SELECT-INFO button , the radio will perform a scan of the Band III DAB channels. As new stations are found, the
station counter on the right-hand side of the display will increase and new radio stations found will be added to the list stored in
the radio.
Manual Tuning – DAB
Manual tuning is an alternative method of finding new stations. Instead of scanning the entire Band III channels automatically, you
may tune the radio directly to a known DAB channel and store all the multiplex in that channel into the available station list.
1. In DAB mode, press the MENU button and the TUNING
press the SELECT-INFO button. The display will show DAB channel and Frequency.
or buttons until the LCD display shows "Manual Tune", then
GB
G B
10