Dab Mode; Operating The Radio; Selecting A Station; Secondary Services - PERFECTPRO Teambox TBX1 Manuel De L'utilisateur

DAB MODE

Operating the radio

1. Carefully extend the antenna. Press the Power button to switch on the radio.
2. If this is the first time to switch on, the radio will be in DAB mode.
3. The first station (in numeric-alpha order 0...9...A...Z) in the list of stations found will
be played. The display will show the station name.
If the radio has been used before, the last used station will be selected.
4. If no signals are detected, "Service not available" will be displayed. It may be
necessary to relocate the radio to a position giving better reception.
You should then carry out an auto scan to find stations, please refer to the section
"Find new stations".

Selecting a station

1. Press the Power button to switch on the radio.
2. The display shows the name of the radio station currently selected.
3. Press the Tuning << or Tuning >> button to scroll through the list of available
stations.
4. When the desired station name appears on the display, press the Select / Info
button to select the station. The display will show the station name while playing.
Note: If after selecting a station the display shows "Service not available", it may be
necessary to relocate the radio to a position giving better reception.

Secondary services

1. Certain radio stations have one or more secondary services associated with them.
If a station has a secondary service associated with it, then the secondary service
will appear immediately after the primary service as you turn the Select / Info
button.
2. Press the Select / Info button to select the secondary service.
Most of secondary services do not broadcast continually and if the selected service
is not available, the radio will re-tune to the associated primary service.
9

Display modes

In DAB mode, the radio can display a range of information on the display.
1. Press the Select / Info button to cycle through the various modes.
a. Scrolling text Displays scrolling text message such as artist/
track name, phone in number, etc.
b. Program type Displays type of station being listened to e.g. Pop,
classic, News, etc.
c. Signal strength Displays the signal strength of radio reception. The
clear unfilled rectangle indicates minimum signal
level required for satisfactory reception.
d. Multiplex name & frequency Displays name of multiplex to which the current
station belongs. And to displays channel number
and frequency for the currently tuned DAB station.
e. Bit rate & audio type Displays the digital audio bit rate.
f. Date Displays the date of today.

Finding new stations

From time to time, new stations may become available. You may proceed to find new
stations as follows:
1. Press the Source button to enter DAB mode.
2. Press the Menu button, the display will show "Full scan".
3. Press the Select / Info button, the radio will perform a scan of the Band III DAB
channels.
As new stations are found, the station counter on the right-hand side of the display will
increase and stations will be added to the list.

Manual tuning

Manual tuning allows you to tune the radio directly to various DAB Band III channels.
1. Press the Menu button, the display shows "Full scan",
2. Press the Tuning >> button to select "Manual tune", then press the Select / Info
button to enter.
3. Press the Tuning << or Tuning >> button to select the desired DAB channel.
Press the Select / Info button to tune the chosen frequency.
4. The signal strength display with an open bar shows the minimum signal strength
needed for good DAB reception. The signal strength bars will go up or down
showing the changing signal strength as you adjust the antenna or the radio
position.
GB
GB
10