Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
12. Optional blade usage
OPT1
• For security reason, in case of
mounting the blade on this product
and use it, purchase the blade kit
(X375000948) and change guard,
handle from the original ones, and
use shoulder strap.
(1) Shoulder strap : 848-J82-3610
OPT2
Change to the debris guard which is
suitable for the metal blade. (OPT2)
(1) Guard-A : 5764-24000
(2) Guard :
(3) Bracket :
(4) Bolt :
(5) Screw :
(6) Nut :
OPT3
Change the loop handle to the J-handle
for safe operation. (OPT3)
(1) Bracket :
(2) J-handle : 6367-14200
WARNING
IMPORTANT
TIGHTENING TORQUE :
for (4) Bolt, (5) Screw
130~174 in-lbs
(14.7~19.6 N.m.)
5766-24110
3250-24120
0225-10620
0263-30614
0280-10605
IMPORTANT
TIGHTENING TORQUE :
42~78 in-lbs
(4.7~8.8 N.m.)
3583-14101
WARNING
• When sharpening, removing, or reattaching the blade, be
sure to wear thick, sturdy gloves and use only proper tools
and equipment to prevent injury.
■ CHOOSE THE BLADE
Choose a suitable recommended cutting attachment according to
the object to be cut. (OPT4)
• When replacing blade always be sure to use products which
have been certified by RedMax.
(1)
OPT4
(2)
(A)
(B)
(C)
(D)
(1) 9" 22-tooth : SST229
(2) 9" 24-tooth : SST249
(3) 8" 8-tooth : SGB088
(4) 9" 8-tooth : SGB089
(5) 8" 4-tooth : SGB048
(6) 9" 4-tooth : SGB049
(7) Nylon line head
(A) Under growth
(B) Heavy weeds
(C) Light weeds
(D) Grass
■ SET UP THE BLADE
OPT5
1. Detach the line head assembly. (OPT5)
(3)
2. Put on the blade, making the marked
(1)
side face the shaft side, put the holder
(2)
and the cover on, and fasten the blade
with the nut. (OPT5)
(1) Cover : 3540-13283
(2) Holder (B) : 6019-13250
(3) Nut : T3002-13260 (STANDARD)
OPT6
■ BALANCE UNIT
1. Put on strap and attach unit to strap.
2. Slide clamp up or down until unit
balances with head just touching on the
ground. (OPT6)
TR2350S
(3)
(5)
(7)
(4)
(6)
TIGHTENING TORQUE :
130~174 in-lbs
(14.7~19.6 N.m.)
U
S
US-17
Publicité
Table des Matières
