Battery Installation - FMS 850mm Ranger Manuel D'utilisation

Model assembly
2. Connect the wing struts to the fuselage- Slide the root of the
strut into its slot then push aft to lock.
3.Secure the wings on the fuselage using the included screws
as shown.

Battery installation

1. Remove the canopy.
2. Adhere the loop side of the hook and loop tape to the battery.
3. With the battery cables facing aft, Install the battery into the
fuselage. Secure with hook and loop tape.
Note: batteries from different manufacturers will vary in weight and
size, it is therefore important to check the center of gravity of the
aircraft before every flight.
KA2.0*20mm
5
E
N