Specifications; Serial Number Plate - SciCan HydriM L110w Manuel De L'utilisateur

9. Specifications

Height, freestanding: 850 mm / 33.5"
Width: 600 mm / 23.75"
Depth: 600 mm / 23.75"
Depth with door open: 1200 mm / 47"
Weight: 80 kg / 176 lbs.
Running Noise: 60 dB(A)
Hot and cold water connections: 3/4"
Inlet water pressure: 1-10 bar
Incoming hot water temperature: 50-70°C / 122-158°F
Drain: 3/4"
Water softener: 1 kg / 2.2 lbs salt capacity
Filling System: 5.5L / 1.5 gallon safety maximum
Drying System: Heater 1 kW
Electrical Connection: 208-240 V 60 Hz 15 A
Equipment pollution degree: Pollution Degree 2
Equipment installation category: Installation category II
Maximum relative humidity: 80% for temp up to 31°C / 88°F
Operating temperature range: +5°C to 40°C / 41-104°F
Max. altitude: 2000m / 6561.7 ft.
Mains supply: + / -10% of nominal

10. Serial Number Plate

When ordering supplies, spare parts or requesting service, please ensure that
the information contained on the serial number plate is available (Model number,
serial number etc.).
The serial number plate is located at the bottom left on the rear panel of the
Hydrim L110w unit. A small label is located on the left hand side of the chemical door.
50% for temp up to 40°C / 104°F
25